Page 1 of 1

Console Very slow

Posted: Mon Nov 01, 2010 10:06 am
by Lennon616
Hi,
The console response is very slow.
I take 1/2 second to rise up a real fader, but software´s console takes almost 4 seconds to respond to this action.
If I assingn a real fader to activate a switch in Suite, and I rise up this fader, the switch goes on rapidly, but when I rise the same fader down.....The switch takes almost 4 seconds to go OFF.
In this way the overal performance of Suite is very slow.
I´ve checked the same hardware in SUITE 2006 and I have found only a little delay.
Can you solve this problem?.
Thanks a lot.
Jose A.

Re: Console Very slow

Posted: Mon Nov 01, 2010 1:42 pm
by simonB
I can't find a delay here, please send me your show.

Why are you activating a switch with a fader?

Re: Console Very slow

Posted: Tue Nov 02, 2010 4:48 pm
by Lennon616
Hi,
Why I use a fader yo activate a switch button? Well,If I have progammed some similar effects(Strobe1,Strobe2 etc) I asingn them to the same fader with differents trigger values because in this way I need ONLY ONE physical control for two or three switches.
Thank.
Jose A.

Re: Console Very slow

Posted: Tue Nov 02, 2010 11:33 pm
by RichterMC
Hi Simon,

Jose is right here.
The Midi console GUI can get very delayed and slow.
Try to move several faders from a midi hardware controller at the same time.
Sometimes the GUI even got stuck.

While talking about midi,
I really need Suite 2 to receive Note On/Off Midi messages properly.
We talked about this here on the forum some month back.


Best Gernot

Re: Console Very slow

Posted: Wed Nov 03, 2010 2:35 pm
by simonB
Hi Gernot

There was a bug in the midi console feedback which has now been fixed. Also, the windows driver is slow of the bcf2000, the driver from behringer is better.

Regarding the note on/off. Dylan says its not finished. It is on the todo list...