External I/O Interface Specification

User based support for The stand alone Ethernet interface.

Moderators: simonB, nick, dylan, florent, Ben

altimex
Posts: 1
Joined: Wed Mar 03, 2010 11:10 am

External I/O Interface Specification

Post by altimex »

Hi I'm looking for a detailed specification for the External I/O interface that appears on the SLESA-IP1 and U5 modules. I'm looking to interface to the units from an external piece of kit and wanted to know what the logic thresholds were for this interface? e.g. TTL / CMOS etc. Are the I/O lines internally pulled up to 3V3 or 5V within the device? Thereby an open collector output would be capable of driving the input? Please advise. Thanks and regards.
simonB
SuperMaxi Forumor
Posts: 1630
Joined: Thu Sep 17, 2009 1:50 pm

Re: External I/O Interface Specification

Post by simonB »

The IO ports are just dry contacts, no voltage needs to be sent.

http://www.nicolaudie.com/tutorials/esa/

See the port triggering tutorial under the advanced features heading
Post Reply