Easypro not reading extentions .sdp .sdv

ESA PRO combines the ease of use of the Easy Stand Alone software and new powerful tools required by the latest LED fixtures

Moderators: simonB, nick, florent, Ben

Post Reply
Posts: 1
Joined: Thu Mar 15, 2018 6:27 pm

Easypro not reading extentions .sdp .sdv

Post by Benjaminmack8 » Thu Mar 15, 2018 6:37 pm

Hi guys, Im trying to edit my current sceen set up that was done by someone else, and cant seem to get easypro to read the extensions. Is anyone familiar with these extensions .sdp .sdv? Id prefere no to have to rewrite every scene, any information is appreciated. Cheers

Maxi Forumor
Posts: 282
Joined: Fri Feb 12, 2016 2:37 pm

Re: Easypro not reading extentions .sdp .sdv

Post by nick » Mon Mar 19, 2018 4:40 pm

Hi Benejamin,

.sdp .sdv are the raw showfiles which are not readable by ESA Pro. You will need the original .arc file used to write the show or .dlm if it was written using ESA2. Earlier versions of our software did not automatically save the showfile to the SD card. So, success depends on which version was used to write the original show. If a show file is not on the SD card and you do not have access to the original, you will need to recreate the show from scratch.

Kind Regards,

Nicolaudie Tech Support

Post Reply