Creating Fixture Profile Issue
Posted: Wed May 24, 2017 4:17 pm
Hi to all.
I'm creating a profile for a par led fixture with Scan Library Editor. Fixture DMX channel specifications are:
Channel 1: Dimmer
Channel 2: Red
Channel 3: Green
Channel 4: Blue
Channel 5: White
Channel 6: Function choose as follows. (0-50 Strobeflash & light dimmer; 51-100 jump change; 101-150 gradients change; 151-200 pulse change; 201-255 voice change).
Channel 7: Speed for all the functions in channel 6.
Channel 8: Nothing (although the fixture states is 8 channel.
Ok, Here comes the issue. Channel 1 to 5, no problem and done but for channels 6 and 7 I have not found a way to configure the profile and make it work properly. I've tried many diferent combinations of effect types such as shutter, manual, auto, free, preset, etc and cannot make it work right on 3D easy View as the fixture works in real.
I'm pretty new to lighting and Scan Library Editor so I know that I'm doing it the wrong way. Any help on this matter will be greatly appreciated.
I'm creating a profile for a par led fixture with Scan Library Editor. Fixture DMX channel specifications are:
Channel 1: Dimmer
Channel 2: Red
Channel 3: Green
Channel 4: Blue
Channel 5: White
Channel 6: Function choose as follows. (0-50 Strobeflash & light dimmer; 51-100 jump change; 101-150 gradients change; 151-200 pulse change; 201-255 voice change).
Channel 7: Speed for all the functions in channel 6.
Channel 8: Nothing (although the fixture states is 8 channel.
Ok, Here comes the issue. Channel 1 to 5, no problem and done but for channels 6 and 7 I have not found a way to configure the profile and make it work properly. I've tried many diferent combinations of effect types such as shutter, manual, auto, free, preset, etc and cannot make it work right on 3D easy View as the fixture works in real.
I'm pretty new to lighting and Scan Library Editor so I know that I'm doing it the wrong way. Any help on this matter will be greatly appreciated.