Hi there
If I selct a color with a button it dosent show it in easyview, but you can See it is sending the right the right dmx value out in the dmx out window, but some of the colors work and are viewed i easyview. The fixture is martin roboscan 218 mode 3
Problem with color i march 20 version
Moderators: simonB, dylan, RichterMC, florent
-
- SuperMaxi Forumor
- Posts: 723
- Joined: Mon Nov 06, 2006 5:12 pm
Hi there
To bruno.falip i found out what coused the problem, it is at problem with the profile for the fixture, some time ago I corrected it becouse the dmx values did not fit with values on martin support page, an then i installed sunlite an then the corrected profile overwriten with faulty one again.
Where can I upload the corrected profile.
To bruno.falip i found out what coused the problem, it is at problem with the profile for the fixture, some time ago I corrected it becouse the dmx values did not fit with values on martin support page, an then i installed sunlite an then the corrected profile overwriten with faulty one again.
Where can I upload the corrected profile.
-
- SuperMaxi Forumor
- Posts: 723
- Joined: Mon Nov 06, 2006 5:12 pm