OK - this is my first post to this forum, so forgive me if someone has already addressed this issue. I did search and I could find the answer...
I am currently using Enttec LightFactory as my lighting controller. I like it, but I have found it to be somewhat buggy and somewhat un-reliable. Not bashing, it is pretty good still - just seeing if Sunlite is a better solution for us.
A friend told me about Sunlite and I have been somewhat obsessed with seeing if it may be a better, more reliable answer for us. I really like what I see and what he showed me and told me of its track record with his use.
My issue is this: ARTNET!!
We send 2 universes of DMX over ethernet in our theatre. Then we use Enttec hardware to convert IP back to DMX and distribute. I am using an Enttec MK2 to convert 2 of those universes (universe 1 and 2) from artnet to DMX. The console is sending the data via Artnet. The console(PC) is set at 192.168.8.96 and the IP->DMX Device is at 192.168.8.101. The Enttec converter, is using Artnet (Subnet 0/Universe 0 and Subnet 0/Universe 1). They talk just fine when using LightFactory. But when I load Sunlite and tell it to use Universe#1=EthernetUniverse#1, Universe#2=EthernetUniverse#2 - it says it cant find DMX hardware I did enable the use Ethernet Control checkbox, but still it cant find the device. I am really trying to use Sunlite to see if it could replace LightFactory for us - but I cant get it to talk ArtNet to our system.
Can someone please help me??
Thanks very much.
Newbie, ArtNet question - please help me...
Moderators: simonB, dylan, RichterMC, florent
Forgot to Add...I am using Sunlite Suite 2006
I am using Sunlite Suite 2006. I need the features of more live show control style.
Thanks Again,
Josh
Thanks Again,
Josh
-
- Experienced Forumor
- Posts: 50
- Joined: Sat Oct 04, 2003 8:44 pm
- Location: belgium
Sunlite Hardwarew Connected
Thanks for the reply.
Currently, no - I do not have any Sunlite hardware connected. Are you saying that if I were to plug a Sunlite USB/DMX input device or something, that Sunlite will then see the device on Artnet? Like it is running in Demo mode until it finds some USB hardware first?
Currently, no - I do not have any Sunlite hardware connected. Are you saying that if I were to plug a Sunlite USB/DMX input device or something, that Sunlite will then see the device on Artnet? Like it is running in Demo mode until it finds some USB hardware first?
-
- SuperMaxi Forumor
- Posts: 723
- Joined: Mon Nov 06, 2006 5:12 pm