Stick DE3 : Scene convert from ESA to ESA2

[MIA]

Dear

I use a stick DE3 and programmed all my scenes some years ago with ESA and stored it with the fileformat *.arc

Now i installed ESA2 but this program use different file format *.dlm.

Also i do a firmware update to version 1.17.

When i start the program and connect via ethernet it connects.
But when i click on stand alone and try to read out the stickk i get a failure :

Read memory

Impossible to read memory

So how could i use my scenes with ESA2.

Is it possibel to convert the files ?

Best regards

Karl

[nick]

Hi Mia,

Unfortunately, it's not possible to read .arc files with ESA2. When you press the read memory button in ESA2 it will look for a .dlm file on the SD card. There is not one there so it will show this error message. If you wish to use ESA2 you will have to create a new show from scratch.

If you want to work with the original .arc file you may be able to find this on the SD card and use it with ESA Pro on a PC.

The latest official firmware version for the Stick-DE3 (at the time of writing 11/05/2018) is 1.13.

Kind Regards,

Nick.