2 Devices don't save shows, show empty sd card.

Sunlite Touch Sensitive Intelligent Control Keypad

Moderators: simonB, nick, florent, Ben

Post Reply
Kogan7
Posts: 1
Joined: Sun Nov 20, 2016 11:55 am

2 Devices don't save shows, show empty sd card.

Post by Kogan7 » Sun Nov 20, 2016 12:04 pm

I have two Stick DE3's.

Made a show in ESA PRO. Saving to device both via network or USB works fine.

Shows are actually saved to SD card and can be seen when i insert SD to PC.

When try to use DE3, it shows Empty SD Card.

In the show i have 16 scenes. Sometimes when i boot the controller it shows name of Scene 4, then whenever i press anything it goes Scene OFF and does
react to anything else. Reboot, the same happens.

Any shows that i save to SD are not readable by ESA PRO. It says no shows found, though they are actually on the SD itself.
Also tried "save to computer" and save to SD inserted in the PC, then putting it back to controller.
Nothing helps.

Tried 3 different SD cards, same happens. Firmware is 1.10 and cannot downgrade it, when the firmware update progress comes to the end at 99% it says device disconnected and stops.

5 days already and no success.

EVOLVEINSTALL
New Forumor
Posts: 6
Joined: Wed Jun 21, 2017 5:46 pm

Re: 2 Devices don't save shows, show empty sd card.

Post by EVOLVEINSTALL » Thu May 03, 2018 9:10 pm

Kogan7,

Did you find a solution for the issue? Think i'm suffering the same, won't write the file to the DE3 but when saved via PC, it works.

Cheers,

Rob

Post Reply