Startup Squence on Stick DE3
Posted: Tue Oct 27, 2015 9:07 am
I am running a Stick DE3 with various stored scenes that can be called up. What I would like to do is have a start up scene that always runs when the DE3 is turned on (not on power up).
The DE3 is being used to control Led ligting in and aroound a swiming pool. I would like a scene to run when the unit is first turned on to create a wow facter. This can be a short scene typically only 10 to 20 seconds and then to revert to another scene that is typically used for the swimmers. I could add the sequence to the start of each scene but a scene is continusally running in loop mode and the startup squence is not required.
Can a scene be run then then links to a second scene whereby that second scene is in a loop ?
One last question. I understand that the Stick can enable a black out feature eg control an external relay. does this mean that when the Stick is then turned on from the front the relay operates, can a start up delay then be added as typically the relay will be used to enable power to some of the light controllers and these usually take about 5 seconds from power up to stable and ready to recieve DMX packets.
The DE3 is being used to control Led ligting in and aroound a swiming pool. I would like a scene to run when the unit is first turned on to create a wow facter. This can be a short scene typically only 10 to 20 seconds and then to revert to another scene that is typically used for the swimmers. I could add the sequence to the start of each scene but a scene is continusally running in loop mode and the startup squence is not required.
Can a scene be run then then links to a second scene whereby that second scene is in a loop ?
One last question. I understand that the Stick can enable a black out feature eg control an external relay. does this mean that when the Stick is then turned on from the front the relay operates, can a start up delay then be added as typically the relay will be used to enable power to some of the light controllers and these usually take about 5 seconds from power up to stable and ready to recieve DMX packets.