Firmware 1.07

Sunlite Touch Sensitive Intelligent Control Keypad

Moderators: simonB, nick, florent, Ben

Post Reply
SuperMaxi Forumor
Posts: 1630
Joined: Thu Sep 17, 2009 1:50 pm

Firmware 1.07

Post by simonB » Thu Sep 24, 2015 2:47 pm

A new firmware version is available online and can be downloaded here:

-minor bug corrections and optimisations. In particular improvements to the SD card writing processes.
-remove 2gb card limitation- now 32gb
-possibility to disable auto backup of dimmer/speed/color changes. This can extend SD card life and prevent SD card corruption if power is lost whilst the modifications are being backed up
-show error on screen if there’s a fault with the clock (i.e. if the battery is missing)
-if fading is disabled on a channel scene fade times are now also ignored on the channel
-screen no longer flickers when receiving TCP/UDP commands
-problem corrected with behaviour of color wheel when used with the remote app
-show INIT SD CARD when the SD card is being initialised as the controller is being powered up (before a white screen was shown). This can help distinguish between an SD card initialisation problem and a screen problem

New Forumor
Posts: 10
Joined: Mon May 04, 2015 7:51 am

Re: Firmware 1.07

Post by tpm » Thu Jan 14, 2016 2:55 pm

is this a problem of card corruption you mention?
--> Just have a situation with a probably defective SD card. The Stick DE3 doesn't start correctly anymore and the startup procedure only goes to the screen with the date and time. Connection to a PC via USB isn't possible too.

Maxi Forumor
Posts: 282
Joined: Fri Feb 12, 2016 2:37 pm

Re: Firmware 1.07

Post by nick » Thu Feb 25, 2016 5:13 pm


I haven't seen this corruption problem, but in this situation I would reformat the microSD card to FAT (Not FAT32) and try again. Or replace the microSD. Did you get the issue resolved?

Kind Regards,

Nicolaudie Tech Support

Post Reply