Nicolaudie Architectural Forum

I have a problem with the synchronisation of 2 Sticks-DE3

konfiguration is as follows (Firmware Sticks 1.05, iOS 8.3)
2x Stick-DE3 connected via Ethernet to a WiFi-Router
- Stick A's DMX-output is used
- Stick B only connected via Ethernet
- Mobile App runs on iOS


- On the Stick glass surface it works very well, the 2nd Stick always show same Scene etc.
- when I use the iOS app and choose Stick A (using same surface as on Stick directly), Stick B dont changes the scene as sometimes (DMX-output is ok)
- when I use the iOS app and choose Stick B (using same surface as on Stick directly), Stick A also shows the same correctly.
- when I use the iOS app and choose Stick A (using scene buttons surface), Stick B dont shows any changes (DMX-output is ok)
- when I use the iOS app and choose Stick B (using scene buttons surface), Stick B shows reactions on its display but nothins happens on Stick A nor any changes an DMX-signal.

Knowing this probelm or is it a setting fault?

regards, Thomas

Hi Thomas,

Sorry to hear you're having problems. I have passed the information on to our developers who will run some tests to see if they can replicate the problem.

Hi again,

Our developers have managed to replicate the bug and are in the process of finding a solution, once they have we will release an updated firmware with the fix.

Has there been a resolution to this issue? Is there a new firmware version that this is addressed in?

Hi, our developers are still working on it at the moment. I will let you know when we have a fix available.