Manual control of individual channels?

Sunlite Touch Sensitive Intelligent Control Keypad

Moderators: simonB, nick, florent, Ben

Post Reply
Ratio01
Posts: 2
Joined: Tue Dec 16, 2014 7:15 pm

Manual control of individual channels?

Post by Ratio01 » Mon Dec 29, 2014 5:20 pm

Is there a way to manually control individual channels from the DE-3? In other words; A way to change the values of an individual DMX address from the STICK interface? For instance: I would like to be able to change the color of one instrument in a scene without affecting the others.

simonB
SuperMaxi Forumor
Posts: 1630
Joined: Thu Sep 17, 2009 1:50 pm

Re: Manual control of individual channels?

Post by simonB » Fri Feb 06, 2015 3:35 pm

This is not possible in stand alone mode unless you put each channel into a different area (however there are a maximum of 10 areas)
Simon
--
Sales/Support

Ratio01
Posts: 2
Joined: Tue Dec 16, 2014 7:15 pm

Re: Manual control of individual channels?

Post by Ratio01 » Fri Feb 06, 2015 4:11 pm

Thank you simonB. Since I posted that topic question I have created a different area for each of 5 RGBW instruments. The problem I am experiencing now is that I cannot take manual color control in any of the areas created. I can use the dimmer, speed, and scene buttons on each area but not the palate. All of the manual controls (including the palate) work in the "Global" area but I cannot change the colors in any other area. (i.e. individual instruments).

All firmware is up to date and I have reloaded the Show file several times.

Thank you again.

simonB
SuperMaxi Forumor
Posts: 1630
Joined: Thu Sep 17, 2009 1:50 pm

Re: Manual control of individual channels?

Post by simonB » Wed Feb 11, 2015 11:58 am

Hi there, send me your show file and I'll take a look.
Simon
--
Sales/Support

Post Reply