New STICK-DE3 Official firmware 1.02

[simonB]

We have a new official firmware which will be available on our downloads page within the next 2 weeks. This contains the following new features and bug fixes since the June 2013 version:

_______________________________________________________________________________

********FIXED BUGS********
_______________________________________________________________________________

sometime DMX LIGHTPAD display a white screen, we need to exit and re-try
------------------------------------
CW WW support
------------------------------------
the dimming is not working correctly on areas above area 6
area 7 dims area 1, area 8 dims area 2 etc.....
------------------------------------
fades don't work properly on DMX universe 2
------------------------------------
Trigger a port
Press an arrow
The screen will stop updating when another port is triggered, however the scene will play
------------------------------------
STICK wake on port trigger
------------------------------------
-stop or pause a scene by holding the scene button
-change page
-change back to original page
-the top icon says Stop/pause, the middle icon says Play
------------------------------------
fading fixed with blackout button
------------------------------------
several other small bug fixes and optimisations

_______________________________________________________________________________

********NEW FEATURES********
_______________________________________________________________________________

daylight saving day
------------------------------------
default IP address should be 192.168.1.20 when you reset the stick, not 000.000.000.000
------------------------------------
possibility to start on the previously running scene
------------------------------------
lock with passcode
------------------------------------
possibility to dim to 0% in screen settings
------------------------------------
Possibility to trigger a calendar event when the controller is on standby
------------------------------------
If a scene has a fade, it will fade in when the stick is powered, but it won't fade in when the stick is switched on and off from the standby button
------------------------------------
Fade scene ( 5 choices )
Never
From Show
Force
Force max
Force min
------------------------------------
in Date/Time settings ADD 3 parameters Longitude/Latitude/UTC-GMT (
Longitude -180 to +180 step 1 Default 0 / Latitude -90 to +90 step 1
Default 51 / UTC-GMT -12 to +13 step1 Default 0 )
------------------------------------
The device shows 59 instead of 23 when you press the "-" button if you are on "0"
------------------------------------
not possible to set a manual IP address (it fails to save)
------------------------------------
possibility to select a scene without activating it
------------------------------------
option to synchronise blackout on the network
------------------------------------