replace DMX Chip on STICK3
Posted: Mon May 20, 2013 2:21 am
I have ordered 2 STICK 3 devices. The original STICK3 the universe2 DMX did not work, On the 2nd unit it was working and now again the 2nd iniverse is not working.
I suspect the DMX Chip for the 2nd universe is shorted out (although I don't know why this keeps happening!! )
with the spare STICK3 unit I have an extra DMX Chip - In theory I could take the DMXUniverse1 chip from one board and install it in the 2nd universe location on the 2nd board.
Can anyone confirm if this will work and if so provide instructions on installing/removing the DMX Chip from the board?
I suspect the DMX Chip for the 2nd universe is shorted out (although I don't know why this keeps happening!! )
with the spare STICK3 unit I have an extra DMX Chip - In theory I could take the DMXUniverse1 chip from one board and install it in the 2nd universe location on the 2nd board.
Can anyone confirm if this will work and if so provide instructions on installing/removing the DMX Chip from the board?