Page 1 of 1
How to load and use scene on STICK-DE3
Posted: Thu Nov 29, 2012 9:34 am
by Yvanou
Hi,
We're are using STICK-DE3 to drive architectural lighting. I created scenario with ESA PRO but the hardware is not recognized by my computer and I cannot upload animation on the hardware.
How can I do that ?
ThanX
Re: How to load and use scene on STICK-DE3
Posted: Fri Nov 30, 2012 12:15 pm
by simonB
hello
Make sure you're using the beta version of esapro here:
http://www.nicolaudie.com/en/stick-de3.htm
Re: How to load and use scene on STICK-DE3
Posted: Tue Jan 01, 2013 8:07 pm
by jacou
I use the esa pro beta.
I made up a simple program with 4 scenes.
In "live"-mode all scenes work fine.
when uploading the program (write the interface memory), I get no errors. All looks fine but on the stick only scene "(1) probeersel" can be activated.
Are the others not uploaded? What is wrong?
Re: How to load and use scene on STICK-DE3
Posted: Wed Jan 02, 2013 3:41 pm
by simonB
Try removing and then re-assigning the scenes to the STICK with the latest beta of ESAPro