The star of the STICK family.
Moderators: simonB, nick, florent, Ben
- Posts: 1
- Joined: Wed Feb 12, 2020 8:16 pm
You posted that you needed to update the documentation to reflect the changes you made to only accept UDP connections,
but it seems you still haven't done that. Can you find some time to do actually do that? And are there any more changes that
hasn't made it to the documentation? Can you now receive status messages from the stick-DE3 over UDP even though TCP was used for this earlier?
nick wrote: ↑
Thu Dec 20, 2018 4:56 pm
Unfortunately with the Stick-DE3 firmware 2.1, the remote protocol no longer supports TCP packets. You must use UDP packets on port 2430 instead.
We need to update the documentation to reflect this. The last firmware that supported TCP remote protocol was 1.13.
- Posts: 1
- Joined: Mon Jul 19, 2021 8:45 am
Task - control from AMX controller NX-3200 via tcp protocol. According to the instructions for the Sunlite STICK-DE3 "STICK 3 Remote Protocol" I try to send commands from the laptop to the STICK-DE3 via the Hercules program.
Scene Control Quick Triggering commands work.
But there is no reaction to the Button Simulation commands either.
Controller firmware version - beta 2.28 (for Disable Security for Cloud Access). Send TCP Packet to port 2431.
Please tell me how to solve the passage of the remaining commands.
- Junior Forumor
- Posts: 18
- Joined: Wed Oct 18, 2017 7:11 am
- Location: France
As Nick said, the remote protocol no longer supports TCP packets. You must use UDP packets on port 2430 instead.