Problem assigning different fixture modes.

The second edition of our lighting control software designed for mobile DJ and architectural applications

Moderators: simonB, nick, florent, RichterMC, dylan, Ben

Post Reply
peteknobloch
Junior Forumor
Posts: 41
Joined: Sat Mar 07, 2015 10:06 pm

Problem assigning different fixture modes.

Post by peteknobloch » Sat Dec 05, 2015 3:02 am

I am having problems with assigning fixture modes in the SETUP screen on the ESA2 product. The fixture I am using is Pulse->Ledbar320. The problem happens when I assign 2 of the Ledbar320 fixtures operating in Mode 4 (26ch mode) and then assign 2 more Ledbar320 fixtures in Mode 3 (14ch mode). I then do a SAVE and exit the ESA2 utility. I then bring up the saved .dlm file and the 3rd Ledbar320 has changed to a MODE4 fixture with the 4th one missing due to not enough free room due to other fixtures that I had defined. This is happening with the Sept 14, 2015 release. I tried including the .dlm file with the post but it seems it isn't allowed. Can you help?

Pete

peteknobloch
Junior Forumor
Posts: 41
Joined: Sat Mar 07, 2015 10:06 pm

Re: Problem assigning different fixture modes.

Post by peteknobloch » Sat Dec 05, 2015 1:44 pm

I was able to temporarily fix my problem by creating a copy of the.ssl2 file called
C:\ESA2\ScanLibrary\Pulse\LEDBAR 320 - Copy.ssl2
I used the original file for the MODE 4 settings and the new copy using MODE 3.

Post Reply