Programming error!

Sunlite Suite 2 is a complete re-design of Suite 1. Please discus any issues here

Moderators: simonB, nick, florent, RichterMC, dylan, Ben

Post Reply
Posts: 1
Joined: Thu Jan 24, 2019 4:43 pm

Programming error!

Post by VSDhawan » Thu Jan 24, 2019 4:50 pm


I’m programming 8 moving heads in the software and I’m making a timecode show for permanent installation. I have created some cues and programmed it all in easy show, everything seems fine but one of my 8 fixtures is triggering a little early than it should according to the cue... I made the cues again and again, all lights and cues going well but one light is still coming a little early in one particular cue! I looked at the fixtures in the software and I noticed there is “a” written on it... can anybody tell me what does that mean ?
I have attached the screenshot of that.

9DE0502D-B0EA-4A94-B9DC-CD7E80B4DCC6.jpeg (127.61 KiB) Viewed 476 times

Junior Forumor
Posts: 31
Joined: Tue Mar 25, 2014 4:21 pm

Re: Programming error!

Post by pperpot » Tue Jan 29, 2019 6:58 am

Hi VSDShawan,

This is simply a keyboard shortcut. If you press "a", you will activate fixture #8 pan/tilt.

You can delete the shortcut by
1) clicking on the icon to select it then
2) press <ctrl>+<Del> on your computer keyboard

Best regards,

Post Reply