Easy Statik Sence

ESA PRO combines the ease of use of the Easy Stand Alone software and new powerful tools required by the latest LED fixtures

Moderators: simonB, nick, florent, Ben

Post Reply
Posts: 4
Joined: Tue Apr 11, 2017 6:45 am

Easy Statik Sence

Post by Gerd » Tue Apr 11, 2017 8:39 am

I need helb to programm an easy Lamp on

In Detail

I have a Bar the Ambient light will be cotrollt by Stick 3 and ESA Pro,
how can I set an easy light on without a time line and more than one sence per aera ?

Ich don´t like a cue for 24H are there any other way ?

Maxi Forumor
Posts: 282
Joined: Fri Feb 12, 2016 2:37 pm

Re: Easy Statik Sence

Post by nick » Thu Apr 13, 2017 3:38 pm


Thank you for your question.

I understand that you want the light to simply turn on and stay on. You do not need create a show which is 24 hours long because scenes by default are set to 'always loop'. This means they will repeat over and over, forever, until another scene is triggered. You only need a very short static scene on the timeline to make a light turn on and stay on.

If you would then like to turn the light off, you can either create an off scene yourself or enable the default off scene on the Stick-DE3.
1) Press the standby button for 2 seconds.
2) Scene (S) > S0 (off) ... enable
3) Using the scene buttons you will now find you can select A00 which is off.

Kind Regards,

Nicolaudie Tech Support

Post Reply