Ethernet connection problem
Posted: Fri Jan 13, 2012 9:21 am
We are trying to connect a Stick KU1 with ethernet add-on to our ethernet network.
Software is updated with tools.exe, ethernet is enabled, IP address set to 192.168.0.196, gateway is 192.168.0.1.
Our router is set in 192.168.0.1 and admits DHCP from 190 to 220.
Everything seems fine, but the router does not identify the stick. We have tried different cables and different addresses.
Any more ideas?
Thank you!
Software is updated with tools.exe, ethernet is enabled, IP address set to 192.168.0.196, gateway is 192.168.0.1.
Our router is set in 192.168.0.1 and admits DHCP from 190 to 220.
Everything seems fine, but the router does not identify the stick. We have tried different cables and different addresses.
Any more ideas?
Thank you!