STICK-KE1 Lights All Flash

Sunlite Touch Sensitive Intelligent Control Keypad

Moderators: simonB, nick, florent, dylan, Ben

Post Reply
Patchkno
Posts: 1
Joined: Thu Oct 13, 2016 10:23 pm

STICK-KE1 Lights All Flash

Post by Patchkno » Thu Oct 13, 2016 10:29 pm

Have a unit that is 1 year old. Has worked wonderfully up until this week.

When powered up all seems well until you activate a scene. I have only one programmed, so activating #1 acts as normal for about 30 seconds, and then it fails and ALL lights on the STICK-KE1 flash on and off over and over again.

When hooked via USB to PC, all is fine.

Any help is appreciated!

I note in manual that it should have a 6v adapter but has a 9v.

Not sure if this is a problem................

nick
Maxi Forumor
Posts: 282
Joined: Fri Feb 12, 2016 2:37 pm

Re: STICK-KE1 Lights All Flash

Post by nick » Wed Oct 19, 2016 1:55 pm

Hi Patchkno,

Thank you for your message.

Can you please submit a support request using the following link and we will be able to resolve this for you:
https://store.nicolaudie.com/repair

Kind Regards,

Nick.
Nicolaudie Tech Support

KathrynTriak
Posts: 3
Joined: Sun May 20, 2018 1:27 pm
Location: Ireland
Contact:

STICK KE1 Lights All Flash

Post by KathrynTriak » Thu May 31, 2018 4:01 am

I have a stick gu2 controlling my leds. Everything was ok but now 1 light is a different color from the rest.
Also when I turn the lights off 1 fixture stays on.

Any help?

Thanks,
Chris
https://www.1prikid.ru/ Могу я купить кошельки женские мaгaзины москвы

Post Reply