Nicolaudie Architectural Forum

I have a problem,
For my work I need to replace a drive.
on the memory card, no data is present.

Now I have to write a new program to control two LED DMX beams.

is intended that a variety of buttons are used for a certain color, it also must be able to be dimmed,

can someone explain to me how to do this?

greetings stefan from Netherlands

Hi Stefan,

Yes you can do this using ESA2 or ESA Pro software, which both work with the Stick-KE1/KU1.
https://www.nicolaudie.com/download.htm

ESA Pro Manual :
https://www.nicolaudie.com/manuals/#/en/esa-pro/welcome
Video Tutorials: https://www.youtube.com/watch?v=GkiAXS4 ... y_QABtedTH

ESA 2 Manual :
https://www.nicolaudie.com/manuals/#/en ... e-we-start

Create a different scene for each color and then assign the scenes to the different buttons in the Standalone tab. Then write the show to your Stick1. The Stick1-KU1 and KE1 allow you to dim any scene using the dimmer slider at the bottom of the panel.

Kind Regards,

Nick.