Sunlite Touch Sensitive Intelligent Control Keypad

Moderators: simonB, nick, florent, dylan, Ben

Post Reply
Posts: 2
Joined: Wed Sep 28, 2016 5:35 pm


Post by stefan » Wed Sep 28, 2016 5:44 pm

I have a problem,
For my work I need to replace a drive.
on the memory card, no data is present.

Now I have to write a new program to control two LED DMX beams.

is intended that a variety of buttons are used for a certain color, it also must be able to be dimmed,

can someone explain to me how to do this?

greetings stefan from Netherlands

Maxi Forumor
Posts: 282
Joined: Fri Feb 12, 2016 2:37 pm

Re: problem

Post by nick » Thu Sep 29, 2016 10:32 am

Hi Stefan,

Yes you can do this using ESA2 or ESA Pro software, which both work with the Stick-KE1/KU1.

ESA Pro Manual :
Video Tutorials: ... y_QABtedTH

ESA 2 Manual : ... e-we-start

Create a different scene for each color and then assign the scenes to the different buttons in the Standalone tab. Then write the show to your Stick1. The Stick1-KU1 and KE1 allow you to dim any scene using the dimmer slider at the bottom of the panel.

Kind Regards,

Nicolaudie Tech Support

Post Reply