All LED on controller blinking when chenching page A,B,C,D,E

Sunlite Touch Sensitive Intelligent Control Keypad

Moderators: simonB, nick, florent, dylan, Ben

Post Reply
vlad
Junior Forumor
Posts: 15
Joined: Mon Jun 06, 2011 5:47 am

All LED on controller blinking when chenching page A,B,C,D,E

Post by vlad » Sun Jun 22, 2014 5:35 pm

Hello

My KE-1 works 2 years in restaurant. But this Friday I had such issue.

When I switch on the controller and press 1 key on A page everything is fine. But when I trying to change page from A to B all LEDs on controller starting blinking several times, then they blinking one by another and after that controller acting like it had been just turned on. I pressing 1 key then press arrow to change page and everything repeats.

I know for sure that the pages B,C,D are signed on this controller.

And one more thing. Some times it happens that I managed to switch pages from A to D without restarting. But when I switch page from D to E (E page is not signed on this controller) all this mess repeats (the LED indicators are blinking and all fixtures fall to blackout).

Can you help me?

vlad
Junior Forumor
Posts: 15
Joined: Mon Jun 06, 2011 5:47 am

Re: All LED on controller blinking when chenching page A,B,C

Post by vlad » Mon Jun 23, 2014 3:19 pm

I changed AC adapter and now everything works fine

AC adapter to KE1 is 9V 0.65A. But I was surprised when found out that DE-3 has 6V power supply. I thought that power supply should be same for whole range of STICK. But it's not so.

Anyway now everything is ok

simonB
SuperMaxi Forumor
Posts: 1630
Joined: Thu Sep 17, 2009 1:50 pm

Re: All LED on controller blinking when chenching page A,B,C

Post by simonB » Fri Aug 01, 2014 2:22 pm

The same 6V power supply works for all STICKs except the KU1 which requires 9 volts. The KE1 works fine with 6V.
Simon
--
Sales/Support

Post Reply