S.T.I.C.K - KU1/KE1 factory reset

Sunlite Touch Sensitive Intelligent Control Keypad

Moderators: simonB, nick, florent, dylan, Ben

Post Reply
brightsparks
Junior Forumor
Posts: 16
Joined: Mon Feb 20, 2012 8:44 pm

S.T.I.C.K - KU1/KE1 factory reset

Post by brightsparks » Thu Apr 11, 2013 3:30 am

Hey Guys,
I have inherrited a STICK, That has scenes on it already. that i want to clear off. It also has a password for connecting with the remote app, that i dont know that i would like to reset.

I cant find anything about how to restore factory default setting on this device.
ALSO- what is the STICK telling me when all the blue button lights are flashing at the same time???
(i bet it is bad)

Best Regards,
Mick

brightsparks
Junior Forumor
Posts: 16
Joined: Mon Feb 20, 2012 8:44 pm

Re: S.T.I.C.K - KU1/KE1 factory reset

Post by brightsparks » Thu Apr 11, 2013 11:18 am

OK i figured out a couple of my issues i mentioned above. The blue lights were flashing together at me because I had taken the micro SD card out. i spose the blinky blue lights mean no memory.
I am still having problems writing my scenes to the device.
When i try and write to the device it goes along nicley and then a window pops up and says something like "name stick in standalone tab"
I named it as requested (or at least i think i did)
I can see my sticks new name in a little orange tab.
but when i try to write again, i get the same message.
what am i doing wrong here?

best Regards,
Mick

brightsparks
Junior Forumor
Posts: 16
Joined: Mon Feb 20, 2012 8:44 pm

Re: S.T.I.C.K - KU1/KE1 factory reset

Post by brightsparks » Fri Apr 12, 2013 1:51 am

OK, I've got all of my questions nailed!!!
the password to connect via the remote app can be changed from the tool box-
once i connected to the STICK via a usb cable i was able to write the show to the device no worries.

Post Reply