date-calendar
Posted: Mon Oct 29, 2012 9:05 am
good morning,
Affected Stick Firmware 1.30 and 1.19. Date function.
we have a global scene with a total of 11 programs created on the buttons A1-A8 and B1-B3.
For example, to start at 8 program A4 and A8 by 10 clock program.
also have the settings in the Calendar so registered, transferred program-
Restarting the Stick Control conducted and no function of the calendar.?
Hardware Configuration module: time is correct. Set trigger calendar
but not functional.
must be set up separate areas, or is it enough if all the scenes are set in global area,
for your help in advance best thanks
Affected Stick Firmware 1.30 and 1.19. Date function.
we have a global scene with a total of 11 programs created on the buttons A1-A8 and B1-B3.
For example, to start at 8 program A4 and A8 by 10 clock program.
also have the settings in the Calendar so registered, transferred program-
Restarting the Stick Control conducted and no function of the calendar.?
Hardware Configuration module: time is correct. Set trigger calendar
but not functional.
must be set up separate areas, or is it enough if all the scenes are set in global area,
for your help in advance best thanks