Impossible to write memory

Sunlite Touch Sensitive Intelligent Control Keypad

Moderators: simonB, nick, florent, dylan, Ben

Post Reply
redlightning
Posts: 1
Joined: Fri Aug 24, 2012 5:54 am

Impossible to write memory

Post by redlightning » Fri Aug 24, 2012 6:01 am

Currently working on an architectural LED installation of 48 LED fixtures using ESA2 on Macintosh.

Tested the controller out of the box in my shop, did a test program with one fixture and uploaded it to the controller, no problems.

Arrived on site and cannot write to controller.
I can pass data through and program/playback fixtures, just cannot load to controller.

In Standalone mode using USB I see a ? using ethernet I see the controller but get the same result.

I really need to resolve this quickly.

Thanks.

-s

simonB
SuperMaxi Forumor
Posts: 1630
Joined: Thu Sep 17, 2009 1:50 pm

Re: Impossible to write memory

Post by simonB » Fri Aug 31, 2012 12:34 pm

This could be a problem with a corrupt memory card
-Try taking the memory card out and formatting it
-Try with ESA1 or ESAPro on a PC if possibile to help determine if it is a mac or ESA2 problem
Simon
--
Sales/Support

Post Reply