I use external rele for control external power unit (for RGB lamps). Stick have 2 connectors (GND and BL). Internal software short BL and GND when BlackOUT is active. My STICK have standby mode more as active. And external rele have power ON. Can change logic at firmware for BL connector?
When STICK is active -> BL is active -> external rele is active -> external power is active. Now logic is oposite...
Sorry for my english. I am from Russia, Moscow.
STICK and external rele
Moderators: simonB, nick, RichterMC, florent, Ben
Re: STICK and external rele
Sorry, it is not possible to invert the relay in the firmware
Simon
--
Sales/Support
--
Sales/Support