STICK and external rele

Sunlite Touch Sensitive Intelligent Control Keypad

Moderators: simonB, nick, florent, dylan, Ben

Post Reply
poleg
Posts: 1
Joined: Wed Dec 21, 2011 9:17 am

STICK and external rele

Post by poleg » Wed Dec 21, 2011 9:31 am

I use external rele for control external power unit (for RGB lamps). Stick have 2 connectors (GND and BL). Internal software short BL and GND when BlackOUT is active. My STICK have standby mode more as active. And external rele have power ON. Can change logic at firmware for BL connector?
When STICK is active -> BL is active -> external rele is active -> external power is active. Now logic is oposite...

Sorry for my english. I am from Russia, Moscow.

simonB
SuperMaxi Forumor
Posts: 1630
Joined: Thu Sep 17, 2009 1:50 pm

Re: STICK and external rele

Post by simonB » Fri Dec 23, 2011 3:51 pm

Sorry, it is not possible to invert the relay in the firmware
Simon
--
Sales/Support

Post Reply