Touchpad

Sunlite Touch Sensitive Intelligent Control Keypad

Moderators: simonB, nick, florent, dylan, Ben

Post Reply
misslikk
Posts: 1
Joined: Sun Nov 28, 2010 12:55 pm

Touchpad

Post by misslikk » Sun Nov 28, 2010 1:13 pm

I´, using the stick with ethernet add on. Now we are searching for multi touchpads. We use the stick as a light control system .To trigger the different scenes and lights we need wall mounted touchpads.

Do you have some recommendations about suppliers for good looking touch panels for the round boxes (Austria)(1 gang up to 4 gang touch style)

Best regards

Karl

simonB
SuperMaxi Forumor
Posts: 1630
Joined: Thu Sep 17, 2009 1:50 pm

Re: Touchpad

Post by simonB » Mon Nov 29, 2010 4:16 pm

How do you want to connect the switches to the STICK, using the dry contact ports?

I would use a STICK in each room and link them all to a network via the ethernet add-on if you budget will stretch that far.

If not, then the best way is to either find a switch with a dry contact relay or link to an existing system which uses RS232.
Simon
--
Sales/Support

ljudkillen
Junior Forumor
Posts: 20
Joined: Tue Jul 27, 2010 9:20 am

Re: Touchpad

Post by ljudkillen » Mon Apr 04, 2011 7:31 pm

I am searching for similar answer. i would like to use either the stick or one of the other standalone interfaces with a waterproof keypad.
I can read how to connect up to 8 switches but when it comes to the binary... I believe that there is a way to build a keypad for more then 8 connections. Maybe with an array or net of diodes? Can you guide me?

simonB
SuperMaxi Forumor
Posts: 1630
Joined: Thu Sep 17, 2009 1:50 pm

Re: Touchpad

Post by simonB » Tue Apr 05, 2011 11:25 am

I've attached an example on how you can combine ports using diodes connected to dry contact switches
Attachments
Ports-Buttons.pdf
(128.58 KiB) Downloaded 592 times
Simon
--
Sales/Support

ljudkillen
Junior Forumor
Posts: 20
Joined: Tue Jul 27, 2010 9:20 am

Re: Touchpad

Post by ljudkillen » Tue May 31, 2011 10:46 pm

Very nice :-D

Exactly what I was looking for.

Thank you

ejacob
Posts: 1
Joined: Mon Apr 02, 2012 10:39 pm

Re: Touchpad

Post by ejacob » Mon Apr 02, 2012 10:49 pm

Hi, since I got my stick I realized that touchpad buttons 6, 7 and 8 are not working. I can control by PC or Iphone, but not fisicaly on the control panel.
Is it a hardware defect ? or configuration ?

Thank you

Post Reply