LEDS BLINKING

[AGUS]

Hi, i have a problem whit my stick, always the blue led in the scenes and blackout blinking, whit the usb cable & whitout, but the software esa pro recognizes the hardware, but when i write in the interface memory, one message say "no memory card" i change the memory card whit the same result...
the firmware is 1.13 the lapto have windows 7 64 bit and the S/N is 729
Helppp pleaseeeee!
Thanks

[simonB]

Download the latest version of ESA PRO and update the firmware. Try with a different memory stick. We can begin to troubleshoot from there.

[Oclaus]

Hello,

I have a Stick 1.11 with the Part number 465.

The STICK´s Scene LED´s and the On/Off LED´s start to flash when I plug the stick to the power source or connect it via USB to a PC.
The Interface is not recognized by the update Tool or ESA Pro Software.
I´ve been trying to connect it to various operating systems: Vista, XP and Windows 7 but the problem persists.

Can you help me out with this issue? I urgently need the STICK get back working in a few days... :(


Regards,

Oliver

[simonB]

Hi Oliver

Take out the mini SD, put it into an SD card reader and format it. Insert it back into the STICK and re-connect.

If this doesn't work, try with a new mini SD card.

Let me know if you are still having problems with the detection

[Oclaus]

Hi,

first off all thank you very much for the fast reply.

I´ve formatted the 128mb mini SD which was shipped with the STICK and again the scene LED´s and the On/Off LED are blinking.
The Scene LED is on "A" and the dimmer led is also on.

When I use a formatted Sandisk mini SD 1GB:
Only the scene LED´s and the On/Off LED blink. The Scene LED and the dimmer LED remain off.

By the way: The data LED is always orange with both SD Cards...

Regards,

Oliver

[Oclaus]

Gentlemen,

I just want to close my issue with a big THANK YOU !
The STICK and the aditional com+ option arrived yesterday and is up and running !
I will test the Suite 2 beta and am looking forward to implement it in a club in Munich.

I will always recommend nicolaudie products to future clients.

Best regards,

Oliver

[simonB]

Good to hear, and remember we are always looking for new projects to put on our website and NTV, so let us know how you get on and take lots of photos!