connect 2 s.t.i.c.k. together

Sunlite Touch Sensitive Intelligent Control Keypad

Moderators: simonB, nick, florent, dylan, Ben

Post Reply
markon
Posts: 1
Joined: Tue Apr 20, 2010 5:28 pm

connect 2 s.t.i.c.k. together

Post by markon » Tue Apr 20, 2010 5:37 pm

How we can connect 2 stick together. We want use 1 stick in the begining hall and second in the end of the hall.

I need information about the connection intermidiatly

We try to put rs232 communication between stick, with tx and rx with reverse function

simonB
SuperMaxi Forumor
Posts: 1630
Joined: Thu Sep 17, 2009 1:50 pm

Re: connect 2 s.t.i.c.k. together

Post by simonB » Wed Apr 21, 2010 8:21 am

A Master/Slave option is not possible, but may be at some point in the future.

For now, the only option is to use ethernet. Put the same program on both STICK's, connect both STICK's to a router (you will need the ethernet add-on). You will also be able to control both STICKs from a remote control application available for PC, MAC, Linux, Iphone, Android Phone and Windows phone (as long as they are connected to the network).

Kovalev
Posts: 2
Joined: Thu Sep 02, 2010 9:34 am

Re: connect 2 s.t.i.c.k. together

Post by Kovalev » Thu Sep 02, 2010 9:39 am

Hi Simon!
Is this function work now?
How can I connect 2 stick's via rs232 ?

simonB
SuperMaxi Forumor
Posts: 1630
Joined: Thu Sep 17, 2009 1:50 pm

Re: connect 2 s.t.i.c.k. together

Post by simonB » Thu Sep 02, 2010 9:46 am

The STICK only receives RS232. You will need an RS232 device to send signals to both STICK's. We are still working on master/slave functionality, but this will all be implemented through ethernet.

Post Reply