Dylan,
BAD NEWS - It is exactly the same
I have tried the link above patch (version 23rd February)
I have noticed a few things that seem to happen now....
1) When you load 3D, the DMX output freezes until the loading has finished and now doesnt display the DMX working.
This never used to happen. The older BETA version without patches works ok.
2) The freeze, when it happens, seem to happen mainly just after you change the scene in the master page.
3) The freeze when it happens, stores up the movements and when it recovers,
all the movements that would have happened all let out fast until it all catches up.
4) If the DMX link is lost or the USB box in unplugged, then the USB box is plugged back in, it does NOT output DMX again.
You have to shutdown sunlite and open it again to make the DMX output work again.
5) The freeze time is only now about half of what it used to be.
This may be an illusion for me but probally not.
I do have a suspect problem issue for you.
All the computers I tried this on did NOT have any connection on ethernet or to the internet.
I tried this on another computer that has an ethernet network that was active and I could not get the freeze to happen.
When you try your tests can I suggest you unplug your ethernet cables to
any network you may be running and see if the problem happens.
Thanks
Simon Johnson
