Nicolaudie Architectural Forum

Hi Bart, this could to be a DMX refresh problem, the Geni Strobe seems a bit picky about refresh rates. I found some other postings where people had problems with this Geni Strobo and other DMX controllers. Did you test all timing settings for the BC interface ? Best, Gernot Hi Gernot, I tried quit...

Sorry for wrong placement, overlooked it... I'm running firmware 1.07 on SIUDI8C and tried triggering it from hardwaretools-test, but no luck. Furthermore the strobe is working on other lightdesks, tried it on multiple DMX adresses but no difference. mu DMX timing is set to "default values"...

Hi, All my lamps (Martin Mac, scanners, Showtec 4-bars and so on) are responding to sunlite 2 with the BC controller. However, my strobe does nothing (Geni Golden Strobe MK2)! Channels and strobe are working correctly, I have tested my strobe on multiple lighting tables and they all work fine, howev...

You could use the page speed dial This doesn't work, what am I missing: -A have a cycle in which i plotted a few switches -Every switch sets one PAR lamp to 255 using easyfade -I looped the cycle This should result in a simple PAR loop: PAR1 PAR2 PAR3 PAR4 step 1 ON OFF OFF OFF (switch1) step 2 OFF...

simonB wrote:That's not possible in live, therefore I advise that you use fading between scenes/switches and put these into cycle

OK, made 8 switches for 8 PAR's, put them in a cycle: now i can set fade as you suggested, but cannot change speed anymore... (do I miss anything?)

simonB wrote:Unfortunately there is no way to do this at the moment as the sound activation property is saved inside the button

Any good alternative in mind sparing me to double program every scene/switch ?

That's not possible in live, therefore I advise that you use fading between scenes/switches and put these into cycle So it that case it seems to be best to make a seperate switch for every step and put those in a cycle, wright? (The idea I had originates from the "cheap" conventional cons...

Hi, I have found the options "timed control" and "sound to light", both are working fine independently. However i would like to be able to select a scene/swith where i can swith from timed mode with speed control to "sound to light" using my elation midicon controller. ...

Hi, I've tried quite a lot, but can't find the correct way to change the fade time between steps in a scene/swith during live mode. To be more specific, i like transparent programming, so i only want to program the steps in a swith (or scene), assign it to my midicon console and then assign fade-tim...