Search found 11 matches
- Fri Apr 25, 2014 3:51 am
- Forum: STICK-KU1/KE1
- Topic: low level flicker with firmware update
- Replies: 4
- Views: 11053
Re: low level flicker with firmware update
I have verified that reverting the firmware to an earlier version fixed the flicker issue. The timed events set in the calendar are also once again running at the proper times, where with the newer firmware and config program, the calendar event would always start late. I do not know if the calendar...
- Thu Apr 24, 2014 3:51 am
- Forum: STICK-KU1/KE1
- Topic: low level flicker with firmware update
- Replies: 4
- Views: 11053
Re: low level flicker with firmware update
I reverted the firmware to an ealier 2012 ver og 1.19 and noe the flicker problem is fixed. I also re-updated the time using the old configuration tool. Tomorrow AM I will know if the calendar is all good again.
- Tue Apr 22, 2014 3:30 am
- Forum: STICK-KU1/KE1
- Topic: low level flicker with firmware update
- Replies: 4
- Views: 11053
low level flicker with firmware update
Stick KU1 Firmware 1.19 Device Firmware Compilation date 2014-01-28 08:43:08 Just installed windows 7 64 bit. Had been using 7 32bit prior. Downloaded and installed latest Esa Pro package and also hardware manager. After drivers installed, Hardware manager indicated a firmware upgrade. The installed...
- Sun Nov 25, 2012 3:41 am
- Forum: STICK-KU1/KE1
- Topic: STICK1 fade time
- Replies: 10
- Views: 18703
Re: STICK1 fade time
Thanks! Much better! This does work. Can I toss out another suggestion? How about curves for the fades? Appears to currently be linear.. how about S-curve or logrithmic??? I realize such things would best be done in the DtoA driver stage, but since that is not an option I have seen yet...
- Sun Nov 18, 2012 3:15 am
- Forum: STICK-KU1/KE1
- Topic: STICK1 fade time
- Replies: 10
- Views: 18703
Re: STICK1 fade time
This is the same firmware I already have. i reloaded it just for fun. Same results. A preset with all colors at 255,255,255 transitions to a preset with all colors at 0,0,0 in about 5 seconds while the transition is set to 20. The indicator on the panael continues to blink for the full duration of t...
- Thu Oct 18, 2012 3:24 am
- Forum: STICK-KU1/KE1
- Topic: STICK1 fade time
- Replies: 10
- Views: 18703
Re: STICK1 fade time
OK. It's ayear later and I have now installed the May 2012 release of 1.19 and fade times are still not right. I entered a fade time of 25 seconds and with lights nearly 100% on, a fade to all off last scarcely 4 to 5 seconds. As before, the led on the control continues to blink during the 25 second...
- Sat Jan 28, 2012 6:45 pm
- Forum: STICK-KU1/KE1
- Topic: STICK needs power reset after config tool
- Replies: 0
- Views: 23103
STICK needs power reset after config tool
Stick controller is running on external power supply. Firmware 1.19. Did this with 1.18 also. When connected to USB and using the hardware configuration tool to udate a setting, after sending the configuration to the device and it automatically reboots, the STICK controller comes up on its default s...
- Sat Jan 28, 2012 6:26 pm
- Forum: STICK-KU1/KE1
- Topic: STICK1 fade time
- Replies: 10
- Views: 18703
Re: STICK1 fade time
I have now installed the new firmware 1.19 and fade durations are still wrong. For example, I have fade duration at 20 seconds. LEDs at 255 then select a scene at 0 level . The transition to off takes about 6 seconds.
- Sun Nov 13, 2011 9:12 pm
- Forum: STICK-KU1/KE1
- Topic: DMX output when "off" causes low level flicker
- Replies: 1
- Views: 6101
DMX output when "off" causes low level flicker
I have my STICK connected to an RGB DMX Decoder 24ch (8 RGB) 3A/Ch which uses PWM. When the STICK controller DMX is unplugged from the decoder of if I remove power from the STICK, the RGB flex strip connected is completely off, all LEDs are dark. After applying power to the STICK and as soon as it b...
- Wed Sep 21, 2011 10:40 am
- Forum: STICK-KU1/KE1
- Topic: STICK1 fade time
- Replies: 10
- Views: 18703
Re: STICK1 fade time
Thanks for the reply. Just wanted to mention that the scene indicator lights on the touchpad do continue to flicker during fade transition for the complete duration of fade, in this case 90 seconds although the actual transition was complete after 23 seconds.
- Wed Sep 21, 2011 4:00 am
- Forum: STICK-KU1/KE1
- Topic: STICK1 fade time
- Replies: 10
- Views: 18703
STICK1 fade time
Fade time between scenes is always less than half of the time setup in the cofiguration tool or by using the touch panel entry. Also the transition is not smooth. For example, I have a static white scene at 255,255,255 RGB and I have a 90 second fade selected to a 0,0,0 RGB scene. The fade will run ...