Search found 11 matches

by jimp
Fri Apr 25, 2014 3:51 am
Forum: STICK-KU1/KE1
Topic: low level flicker with firmware update
Replies: 4
Views: 6042

Re: low level flicker with firmware update

I have verified that reverting the firmware to an earlier version fixed the flicker issue. The timed events set in the calendar are also once again running at the proper times, where with the newer firmware and config program, the calendar event would always start late. I do not know if the calendar...
by jimp
Thu Apr 24, 2014 3:51 am
Forum: STICK-KU1/KE1
Topic: low level flicker with firmware update
Replies: 4
Views: 6042

Re: low level flicker with firmware update

I reverted the firmware to an ealier 2012 ver og 1.19 and noe the flicker problem is fixed. I also re-updated the time using the old configuration tool. Tomorrow AM I will know if the calendar is all good again.
by jimp
Tue Apr 22, 2014 3:30 am
Forum: STICK-KU1/KE1
Topic: low level flicker with firmware update
Replies: 4
Views: 6042

low level flicker with firmware update

Stick KU1 Firmware 1.19 Device Firmware Compilation date 2014-01-28 08:43:08 Just installed windows 7 64 bit. Had been using 7 32bit prior. Downloaded and installed latest Esa Pro package and also hardware manager. After drivers installed, Hardware manager indicated a firmware upgrade. The installed...
by jimp
Sun Nov 25, 2012 3:41 am
Forum: STICK-KU1/KE1
Topic: STICK1 fade time
Replies: 10
Views: 10747

Re: STICK1 fade time

Thanks! Much better! This does work. Can I toss out another suggestion? How about curves for the fades? Appears to currently be linear.. how about S-curve or logrithmic??? I realize such things would best be done in the DtoA driver stage, but since that is not an option I have seen yet...
by jimp
Sun Nov 18, 2012 3:15 am
Forum: STICK-KU1/KE1
Topic: STICK1 fade time
Replies: 10
Views: 10747

Re: STICK1 fade time

This is the same firmware I already have. i reloaded it just for fun. Same results. A preset with all colors at 255,255,255 transitions to a preset with all colors at 0,0,0 in about 5 seconds while the transition is set to 20. The indicator on the panael continues to blink for the full duration of t...
by jimp
Thu Oct 18, 2012 3:24 am
Forum: STICK-KU1/KE1
Topic: STICK1 fade time
Replies: 10
Views: 10747

Re: STICK1 fade time

OK. It's ayear later and I have now installed the May 2012 release of 1.19 and fade times are still not right. I entered a fade time of 25 seconds and with lights nearly 100% on, a fade to all off last scarcely 4 to 5 seconds. As before, the led on the control continues to blink during the 25 second...
by jimp
Sat Jan 28, 2012 6:45 pm
Forum: STICK-KU1/KE1
Topic: STICK needs power reset after config tool
Replies: 0
Views: 3130

STICK needs power reset after config tool

Stick controller is running on external power supply. Firmware 1.19. Did this with 1.18 also. When connected to USB and using the hardware configuration tool to udate a setting, after sending the configuration to the device and it automatically reboots, the STICK controller comes up on its default s...
by jimp
Sat Jan 28, 2012 6:26 pm
Forum: STICK-KU1/KE1
Topic: STICK1 fade time
Replies: 10
Views: 10747

Re: STICK1 fade time

I have now installed the new firmware 1.19 and fade durations are still wrong. For example, I have fade duration at 20 seconds. LEDs at 255 then select a scene at 0 level . The transition to off takes about 6 seconds.
by jimp
Sun Nov 13, 2011 9:12 pm
Forum: STICK-KU1/KE1
Topic: DMX output when "off" causes low level flicker
Replies: 1
Views: 2869

DMX output when "off" causes low level flicker

I have my STICK connected to an RGB DMX Decoder 24ch (8 RGB) 3A/Ch which uses PWM. When the STICK controller DMX is unplugged from the decoder of if I remove power from the STICK, the RGB flex strip connected is completely off, all LEDs are dark. After applying power to the STICK and as soon as it b...
by jimp
Wed Sep 21, 2011 10:40 am
Forum: STICK-KU1/KE1
Topic: STICK1 fade time
Replies: 10
Views: 10747

Re: STICK1 fade time

Thanks for the reply. Just wanted to mention that the scene indicator lights on the touchpad do continue to flicker during fade transition for the complete duration of fade, in this case 90 seconds although the actual transition was complete after 23 seconds.
by jimp
Wed Sep 21, 2011 4:00 am
Forum: STICK-KU1/KE1
Topic: STICK1 fade time
Replies: 10
Views: 10747

STICK1 fade time

Fade time between scenes is always less than half of the time setup in the cofiguration tool or by using the touch panel entry. Also the transition is not smooth. For example, I have a static white scene at 255,255,255 RGB and I have a 90 second fade selected to a 0,0,0 RGB scene. The fade will run ...