Pan/tilt inv in Easyview2
Posted: Fri Mar 30, 2018 5:23 pm
Hi,
Here is what I do :
1°) modify pan/tilt settings for some fixtures in "projector" tab in Easyview (check mark)
2°) Save the new Easyview show
3°) Check that my settings are effective
4°) Close and re-open Easyview
5°) Pan/tilt settings have changed and check marks have disappeared :-(
Am I doing something wrong ?
Software version : Sunlite Suite 3 beta, march 16 2018
Show file : https://www.dropbox.com/s/hpt2hsdfn733q ... 2.shw?dl=0
video : https://www.dropbox.com/s/4h9wl3golnqhy ... 6.mp4?dl=0
System : Windows 7, family edition, SP1, 64 bits
DMX controler and firmware version : N/A (not connected)
Best regards,
Pperpot
Here is what I do :
1°) modify pan/tilt settings for some fixtures in "projector" tab in Easyview (check mark)
2°) Save the new Easyview show
3°) Check that my settings are effective
4°) Close and re-open Easyview
5°) Pan/tilt settings have changed and check marks have disappeared :-(
Am I doing something wrong ?
Software version : Sunlite Suite 3 beta, march 16 2018
Show file : https://www.dropbox.com/s/hpt2hsdfn733q ... 2.shw?dl=0
video : https://www.dropbox.com/s/4h9wl3golnqhy ... 6.mp4?dl=0
System : Windows 7, family edition, SP1, 64 bits
DMX controler and firmware version : N/A (not connected)
Best regards,
Pperpot