How to set up blackout button
Posted: Tue Jul 23, 2013 10:30 pm
I'm creating a scanLibrary fixture profile for an RGB moving head very similar to the Martin Mac 101. I have all the channels set and everything runs great except for the white and black circles at the top of the page that turn the beam on (white) or blackout (black). When first tryinmg them they did nothing. If I hold shift button and right click, I get a side window that shows all the channels of the light (Macros, Position, Dimmer, Speed, etc.). If I click on Dimmer (for example), then with the dimmer up to 100% and the color mixing wheel set to white, then when I click the beam (white circle) button, the beam comes on white and those 2 switches for dimmer and beam are activated. But when I turn the dimmer to 0% and then do the same procedure for the blackout button, it saves that setting but also applies it to the beam button. The 2 buttons seem to be linked together. So how do I set them up so that hitting the beam button turns the LEDs up full on white and the blackout button turns them off?