DMX TRIGGERING with extern controller
Posted: Thu Nov 22, 2012 4:14 pm
Dear All
I have a problem with the DMX triggering in sunlite suite 2 FC.
I will connect a Licon CX with a DMX input of Sunlite.
Is it possible to access szenes from sunlite via a DMX signal from the licon.
For example: If the DMX output (licon) of channel 1 is 100, Szene 'LED GREEN' should be started.
Also I will use a dimmer channel of the licon to control a masterdimmer of a page in sunlite.
Is this possible to?
At least I will control a normal channel in Sunlite with a Channel from the Licon.
It would be very nice if someone can help.
Thanks in advance
I have a problem with the DMX triggering in sunlite suite 2 FC.
I will connect a Licon CX with a DMX input of Sunlite.
Is it possible to access szenes from sunlite via a DMX signal from the licon.
For example: If the DMX output (licon) of channel 1 is 100, Szene 'LED GREEN' should be started.
Also I will use a dimmer channel of the licon to control a masterdimmer of a page in sunlite.
Is this possible to?
At least I will control a normal channel in Sunlite with a Channel from the Licon.
It would be very nice if someone can help.
Thanks in advance