Sunlite Suite, the lighting control software which even outshines most of the consoles available on the market !
Moderators: simonB, dylan, RichterMC, florent
-
Jaume
- New Forumor
- Posts: 12
- Joined: Mon Jan 26, 2004 5:55 pm
- Location: Barcelona
Post
by Jaume »
I have a COLORpalette of Chauvet
It has 8 modules of LED's but Color Manager only detects one module. I can't use 8 modules of that fixture?
If i use another single fixture. How can i configure position of each module?
regards,
-
bruno.falip
- SuperMaxi Forumor
- Posts: 723
- Joined: Mon Nov 06, 2006 5:12 pm
Post
by bruno.falip »
You must use single RGB fixtures and setup a matrix.
-
Jaume
- New Forumor
- Posts: 12
- Joined: Mon Jan 26, 2004 5:55 pm
- Location: Barcelona
Post
by Jaume »
Thanks for your answer.
I test with a 12 single RGB:
1234
5678
I can configure in this position?
12345678
regards,
-
bruno.falip
- SuperMaxi Forumor
- Posts: 723
- Joined: Mon Nov 06, 2006 5:12 pm
Post
by bruno.falip »
You just need to select 12 RGB fixtures without any matrix, this is the default position.
-
Jaume
- New Forumor
- Posts: 12
- Joined: Mon Jan 26, 2004 5:55 pm
- Location: Barcelona
Post
by Jaume »
Thank you for your answer. Then I can't change position, only default position.
regards,
-
Jaume
- New Forumor
- Posts: 12
- Joined: Mon Jan 26, 2004 5:55 pm
- Location: Barcelona
Post
by Jaume »
When i select 8 fixtures RGB appear like this:
But may be the real position are one to the other side for the next fixture. I can say to color manager this position?
regards,
-
bruno.falip
- SuperMaxi Forumor
- Posts: 723
- Joined: Mon Nov 06, 2006 5:12 pm
Post
by bruno.falip »
ok, now I understand. It is not possible to modify the position. Imagine a line with 50 devices...