On the SL2048EC can you control the software using a DMX board or can you only control the software using a MIDI interface.
I want to use a very simple DMX board to control the software . I want to plug in the board to the 3 pin DMX input and assign faders to programed scenes and or Flash buttons on the board to select scenes or steps
DMX Input to Control Sunlite
Moderators: simonB, dylan, RichterMC, florent
DMX Input to Control Sunlite
Derek Barton
I have the software loaded and was wondering where do I go to set up a DMX input to an associatted Scene
for example if I have a scene of Par lamps on and want to assign a dmx input eg channel 5 on a DMX board to control the scene, where do I do this I slide fader 5 on the DMX board up and the scene is activated
for example if I have a scene of Par lamps on and want to assign a dmx input eg channel 5 on a DMX board to control the scene, where do I do this I slide fader 5 on the DMX board up and the scene is activated
Derek Barton
-
- SuperMaxi Forumor
- Posts: 723
- Joined: Mon Nov 06, 2006 5:12 pm