problem with audio analysis in sunlite 2048FC

Sunlite Suite, the lighting control software which even outshines most of the consoles available on the market !

Moderators: simonB, florent, RichterMC, dylan

Post Reply
Posts: 1
Joined: Thu Sep 02, 2010 6:06 am

problem with audio analysis in sunlite 2048FC

Post by winway » Thu Sep 02, 2010 6:16 am

We are using INTEL motherboard DH55PJ and are unable to use audio analysis. Pls suggest how to proceed.



The following are two conditions:
1. In sunlite software Audio is enabled.
In windows sound setting:
all are ON nothing is mute or disabled.
volume is full.
Master volume of audio i/p is mute all

in above setting no audio signal appears at audio analysis.

2.when audio i/p for line volume, mic volume & stereo mix are turned on with recording volume at 10%, Noise appears in audio analysis and o/p sound have no effect on audio analysis.

pls suggest what modification it needs.
Last edited by winway on Fri Sep 03, 2010 5:15 am, edited 1 time in total.

SuperMaxi Forumor
Posts: 1630
Joined: Thu Sep 17, 2009 1:50 pm

Re: problem with audio analysis in sunlite 2048FC

Post by simonB » Thu Sep 02, 2010 9:04 am

What exactly is the problem? No incoming audio signal? If so, check that audio is enabled within the starting parameters and check your windows sound mixer that the line in is not muted, disabled or turned down

Post Reply