Hi,
Is there a document that shows the various OpCodes sent back by the KE1?
For example, when I send quick triggering for scene 1:
Stick_U16002 (Hex: 0x53 0x74 0x69 0x63 0x6B 0x5F 0x55 0x31 0x06 0x00 0x01 0x00)
I receive:
Hex: 0x53 0x74 0x69 0x63 0x6B 0x5F 0x55 0x31 0x68 0x00 0x00 0x00 0x01 0x00 and
Hex: 0x53 0x74 0x69 0x63 0x6B 0x5F 0x55 0x31 0x6A 0x00 0x02 0x00 0x00 0x00
I get this response no matter what scene I select, so I assume it is some type of acknowledge that a scene trigger has been activated (OpCode 104 and 106 in this case - so what do these OpCodes really mean?).
I am mostly interested in being able to get feedback on when the unit is On or Off, that I can toggle via the Blackout button simulation. I would use this to know when the KE1 is On (or Off) so I can create a discrete Off command instead of a toggle via some code.
A better and more elegant solution would be to have a discrete On and Off commands instead of a toggle. If you have this command then disregard all of the above.
Thank you,
Alex
Received OpCode
Moderators: simonB, nick, RichterMC, florent, Ben
Re: Received OpCode
Hi Alex
Attached is the latest specification. It explains the feedback. Hopefully it will contain all the info you need.
Attached is the latest specification. It explains the feedback. Hopefully it will contain all the info you need.
- Attachments
-
- STICK-KE1 and KU1 Remote Protocol.pdf
- (91.79 KiB) Downloaded 910 times
Simon
--
Sales/Support
--
Sales/Support