Time triggering 3 overlapping scenes

The lighting control software designed for easy basic applications.

Moderators: simonB, florent, RichterMC, dylan

Post Reply
Posts: 1
Joined: Tue May 26, 2009 1:47 am

Time triggering 3 overlapping scenes

Post by tonytask » Tue May 26, 2009 2:04 am

Hi Everyone

I am new to ESA and need help please.
I need to trigger 3 scenes by the time clock independently and the times will over lap
For example I start one scene at 9am and it runs for 5hours
Secone scene starts at 10am and runs for 4hours
Third scene starts at 11am runs for 6 hours.

I have the ESA program and the interface unit has the time clock
The interface unit controls 3 separate RGB DMX controllers for LED strip light.
Each RGB DMX controller has a separate DIP switch setting to operate independently

My first scene starts fine but then when the second scene starts it over rides what the
firts scene is doing

Any help would be great thanks

Thanks Tony

SuperMaxi Forumor
Posts: 723
Joined: Mon Nov 06, 2006 5:12 pm

Re: Time triggering 3 overlapping scenes

Post by bruno.falip » Thu May 28, 2009 12:00 pm

I ti not possible to do that with the SLESA-U5 and U6 products, you will need a SLESA-U7 to trigger several scenes at the same time.

Post Reply