Compatibility with LumiDrives ColourDriver 36

chammond · Post by **chammond** » Sat Jan 01, 2005 8:57 pm

I would like to control my LEDs with the USB version of Easy Stand Alone. I notice that SLESA has an XLR connector whereas my DMX driver has a RJ45 connector. Is a converter available to allow these devices to be connected together?

roberto · Post by **roberto** » Wed Jan 05, 2005 10:36 pm

Just check in the manual of your leds, how is the pin assigment on the RJ45 connector (it varies on different manufacturers).
It should use only 3 cables, DMX +, DMX -, and GND
Cut a RJ45 cable and solder to the cables a 3 pin cannon conector.

The converter is ready.

chammond · Post by **chammond** » Wed Jan 05, 2005 11:09 pm

Many thanks for your suggestion.

It has the following connections:
Pin 1: Data +
Pin 2: Data -
Pin 7: Common
Pin 8: Common

The data sheet is: http://www.lumidrives.com/Documents/mai ... g%2003.pdf