Page 1 of 1
Stick DE3's not recognized by ESA PRO
Posted: Tue Jun 30, 2015 10:51 pm
by shaggy135
I've ran into this a couple of times now. I have some Stick 3's and they aren't recognized by ESA PRO. My laptop will recognize them just fine. I can see them in Hardware Manager and I can update the firmware just fine. But when I try to open ESA PRO with them plugged in through USB, it just wants to load in DEMO mode. Not recognizing anything connected by USB.
I have tried:
reformatting the memory card
trying a different memory card
plugging into different USB ports
trying a different USB cord
pulling the backup battery out and letting the Stick 3 sit for a while to discharge any possibly saved data
What can I do to get these back to normal working condition?
Re: Stick DE3's not recognized by ESA PRO
Posted: Wed Jul 01, 2015 10:57 am
by Ben
Hi there,
Sorry to hear you're having problems.
First can I check that that you have updated your Stick's firmware using the latest Hardware Manager found in the latest ESA Pro Beta dated 2nd June 2015?
http://www.nicolaudie.com/downloads/fil ... robeta.exe
Re: Stick DE3's not recognized by ESA PRO
Posted: Wed Jul 01, 2015 12:10 pm
by shaggy135
I just downloaded the beta version with the 1.05 firmware dated April 28th, 2015. I updated one of the controllers that I have access to. The software still won't recognize the STICK3 by USB.
Re: Stick DE3's not recognized by ESA PRO
Posted: Sun Jul 05, 2015 9:50 am
by gesatecnico
shaggy135 wrote:I've ran into this a couple of times now. I have some Stick 3's and they aren't recognized by ESA PRO. My laptop will recognize them just fine. I can see them in Hardware Manager and I can update the firmware just fine. But when I try to open ESA PRO with them plugged in through USB, it just wants to load in DEMO mode. Not recognizing anything connected by USB.
I have tried:
reformatting the memory card
trying a different memory card
plugging into different USB ports
trying a different USB cord
pulling the backup battery out and letting the Stick 3 sit for a while to discharge any possibly saved data
What can I do to get these back to normal working condition?
Hi shaggy135
I had the same problem, i think there are a bug in a new firmware 1.05.
I resolved in 2 days.
I reset the stick, with the bootloader switch, in the rear of stick, and with hardware manager of ESA PRO, via USB i send the old firmware 1.04.