Help Lights are not in sync.

Sunlite Touch Sensitive Intelligent Control Keypad

Moderators: simonB, nick, florent, Ben

Post Reply
chriskob
Posts: 2
Joined: Sun Sep 15, 2013 8:17 pm

Help Lights are not in sync.

Post by chriskob » Sun Sep 15, 2013 8:32 pm

I have a stick gu2 controlling my leds. Everything was ok but now 1 light is a different color from the rest.
Also when I turn the lights off 1 fixture stays on.

Any help?

Thanks,
Chris
Attachments
photo (1).JPG
photo (1).JPG (87.56 KiB) Viewed 5488 times

simonB
SuperMaxi Forumor
Posts: 1630
Joined: Thu Sep 17, 2009 1:50 pm

Re: Help Lights are not in sync.

Post by simonB » Mon Sep 16, 2013 10:28 am

Hi Chris

I guess this is a problem with the light, driver or cable. When you turn of the GU2 by pressing the standby button, it sends 0 to all channels (1-128).
Simon
--
Sales/Support

chriskob
Posts: 2
Joined: Sun Sep 15, 2013 8:17 pm

Re: Help Lights are not in sync.

Post by chriskob » Mon Sep 16, 2013 6:49 pm

Ok thanks.

What would be the cause of 1 fixture being a different color then the rest?

Also do you know where I can get some nice cool effects and color file for my gu2 to run?
I have 2 rooms with this setup.

Thanks,
Chris

simonB
SuperMaxi Forumor
Posts: 1630
Joined: Thu Sep 17, 2009 1:50 pm

Re: Help Lights are not in sync.

Post by simonB » Tue Sep 17, 2013 6:40 am

Hi Chris

It could be many reasons, but most likely a faulty driver or a bad DMX connection into the driver.

You can create effects using the ESA2 software.
Simon
--
Sales/Support

Post Reply