Multiple universes

SLESA-U9

Moderators: simonB, nick, florent, Ben

Post Reply
Pavlov
Posts: 4
Joined: Tue Jan 22, 2019 1:57 pm

Multiple universes

Post by Pavlov » Tue Jan 22, 2019 2:03 pm

Hello,

I need to connect more then two universes in stand alone mode. How could I possibly do that?

nick
Maxi Forumor
Posts: 273
Joined: Fri Feb 12, 2016 2:37 pm

Re: Multiple universes

Post by nick » Mon Jan 28, 2019 5:16 pm

Hi,

The SLESA-U9 will only output 256 channels on a single universe.

For 2 universes in standalone mode you will need a SLESA-UE7.

Kind Regards,

Nick.
Nicolaudie Tech Support

Pavlov
Posts: 4
Joined: Tue Jan 22, 2019 1:57 pm

Re: Multiple universes

Post by Pavlov » Tue Jan 29, 2019 6:17 am

Thanks!
About "STICK's" or "SLESA".
It is possible to connect several devices in Master-slave mode to increase the number of universes?

nick
Maxi Forumor
Posts: 273
Joined: Fri Feb 12, 2016 2:37 pm

Re: Multiple universes

Post by nick » Tue Mar 12, 2019 4:31 pm

Hi,

> It is possible to connect several devices in Master-slave mode to increase the number of universes?
This is possible with the SLESA-UE7.

See page 2 of the SIUDI-7B datasheet:
https://storage.googleapis.com/nicolaud ... eet_en.pdf

And the section called 'Synchronization of USB-Ethernet controllers' on ESA Pro Network Control.
https://www.nicolaudie.com/manuals/#/en ... rk-control

I would strongly recommend buying a dedicated wireless access point just for this purpose.

It is not possible with any STICK controllers. You can sychronise STICK-KE1 / KE2 and DE3 areas so that they play the same scenes in different rooms, for example. But you cannot output more than 2 universes in standalone mode on a STICK controller.

Kind Regards,

Nick.
Nicolaudie Tech Support

Post Reply