Micro SD card

SLESA-U7 - SLESA-UE7 - SUITE2-FC

Moderators: simonB, nick, florent, dylan, Ben

Post Reply
jwillsey
New Forumor
Posts: 7
Joined: Thu Dec 11, 2014 11:04 pm

Micro SD card

Post by jwillsey » Wed Apr 29, 2015 6:44 pm

Hi,

I've formatted the Micro SD card that goes into the UE7 as FAT and FAT32, but the UE7 still doesn't recognize the shows I wrote to it using the ESA Pro software. The UE7 keeps displaying "OFF".

Does the Micro SD card need to be in the RAW format? If so, how do I format it RAW?

Thanks,
John

Ben
Super Forumor
Posts: 153
Joined: Wed Mar 25, 2015 2:55 pm

Re: Micro SD card

Post by Ben » Tue May 12, 2015 9:42 am

Hi John,

Normally the SD card should work fine when formatted as either FAT or FAT32 and no need to format as RAW.

To help further can you let me know how the UE7 is displaying the "OFF" message?

OFF Flashing = No SD card inserted or device cannot read the SD card
OFF Static = SD Card has no data
Benno
--
Product Support

Arctech
Posts: 3
Joined: Mon Sep 19, 2016 1:00 pm

Re: Micro SD card

Post by Arctech » Mon Sep 19, 2016 1:16 pm

Hi,

i am experiencing the same issues. I replaced the SD card with a brand new one but when i connect the UE7 to the USB it just displays OFF and ESA2 does not recognize it.

Any advice to make it work? Thanks a lot

nick
Maxi Forumor
Posts: 273
Joined: Fri Feb 12, 2016 2:37 pm

Re: Micro SD card

Post by nick » Tue Sep 20, 2016 3:59 pm

Hi Arctech,

Thank you for message. The SLESA-UE7 (and all SUIDI-7B based devices) are limited to microSD cards of 4Gb capacity or less. Do you know what capacity were you trying to use? If you use a capacity which is too large, you will see the message 'OFF' flashing on the display.

Kind Regards,

Nick.
Nicolaudie Tech Support

Arctech
Posts: 3
Joined: Mon Sep 19, 2016 1:00 pm

Re: Micro SD card

Post by Arctech » Wed Sep 21, 2016 7:52 am

Hi Nick,

thank you for the quick reply. I am actually using 16Gb... I will try with the 4Gb. Is this written somewhere? I cant find it in my documentation. Thanks again.

Arctech
Posts: 3
Joined: Mon Sep 19, 2016 1:00 pm

Re: Micro SD card

Post by Arctech » Wed Sep 21, 2016 8:36 am

Hi Nick,

just a quick follow-up: with the 16Gb card the OFF sign is not flashing but it stays on. Is this normal?
I haven't tried yet with the 4Gb. I'll keep you posted. Thanks.

Post Reply