Replicating the three buttons on the controller


Moderators: simonB, nick, florent, dylan, Ben

Post Reply
New Forumor
Posts: 5
Joined: Wed Jul 04, 2012 1:11 pm

Replicating the three buttons on the controller

Post by chrismb » Tue May 28, 2013 5:24 pm

Hi Simon,

thanks again for the updated firmware to deal with our red flash issue.

I was wondering whether there is any way to replicate the functionality of the 3 buttons on the controller in stand-alone mode - i.e. via the dry ports?

Specifically, I would be interested in creating three buttons that would sit on a drum beater in my hand so I could advance through the cues whilst playing: just like it would be on the box. We could have the keypad created, but the question is whether it can interface with he box in the way I suggest?

Many thanks in advance.

Best wishes


SuperMaxi Forumor
Posts: 1630
Joined: Thu Sep 17, 2009 1:50 pm

Re: Replicating the three buttons on the controller

Post by simonB » Mon Jun 03, 2013 4:06 pm

Hi Chris

It's not possible to skip to the previous or next scene in stand alone using the dry contact ports, however there is a previous and next port inside the interface which you can access. More information on the attacked document:
Documentation SIUDI7-SIUDI8.pdf
(155.53 KiB) Downloaded 512 times

Post Reply